Tools and equipment
- Scissors, Knife, Glue, Tape, Thermometer*
- 1 or 2 liter clear plastic soda bottle
- 12 oz. aluminum soda can
- Corrugated cardboard box approx. 16” x 16” x 16”
- Aluminum foil or reflective plastic from inside chip bags, etc.
- Tape (lables from some bottles make good tape)
From a 1 or 2 liter clear plastic soda bottle (right) cut off the top, 1" below where it becomes straight.
Cut slit 1" long into the side of the top (dotted line) to make it easy to insert into the bottle bottom.
A 12 oz. aluminum can with a dark lable or coat the can with carbon black from a candle or wood fire.
Put the can filled with water into the plastic bottle bottom and insert bottle top and press down to lock can in place.
To make the reflector (right), start with a corrugated cardboard box approximately 16" x 16" x 16". Cut off the top and two sides of the box. Cover the two remaining sides and bottom with aluminum foil or potato chip bags with silver coating facing out. Use wheat paste, glue or tape to adhere to cardboard box. Place bottle on the reflector and place in sun. Keep bottle shadow centered on back of solar panel.
Caution: Water is very hot do not drink from bottle until cool.
To pasteurize, water must be heated to 65°C (158°F)
For lots more great projects made from Everyday Recyclables go to: http://www.recyclabits.com
A copy of this project may be made for personel educational purposes only. © Eric Marlow 2008 All rights reserved