Solar Cooking
(Adding categories)
Tag: categoryselect
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
  +
{{GoogleTranslateLinks}}
==Ajay Chandak==
 
  +
{{Updated|11|3|15}}
[[Image:Ajay_Chandak_industrial_heater.jpg‎|left|300px]]This invention of Prof. [[Ajay Chandak]] has the potential to revolutionize the use of solar thermal application in India. [[Prince India]] invites proposals from Industry & research organisation for commercialization of the new Parabolic Solar Concentrator.
+
[[Image:Ajay_Chandak_industrial_heater.jpg‎|right|300px]]This invention of Prof. [[Ajay Chandak]] has the potential to revolutionize the use of solar thermal application in India. [[Prince India]] invites proposals from industry and research organisation for commercialization of the new Parabolic Solar Concentrator.
The photograph shows only two concentrators to explain the concept while actually three to five concentrators will be used in field depending on site conditions. In the inset the focus on the receiver is shown.
 
   
 
The photograph shows only two concentrators to explain the concept while actually three to five concentrators will be used in field depending on site conditions.
Salient features of the new system are:
 
   
 
Salient features of the new system are:
#Multiple reflectors with square shape in plan.
 
  +
#Compact design as the shape is switched over to square than round.
 
 
#Multiple reflectors with square shape in plan.
#100% aperture area available round the year. (Established [[Wolfgang Scheffler|Scheffler]] technology gives approximately 60% average aperture area.)
 
 
#Compact design as the shape is switched over to square from round.
#Single axis fixed speed daily automatic tracking eliminates need of sensors and complicated hardware. Tracking system is easy to operate and maintain. Seasonal tracking is manual to be set once in 3-4 days.
 
 
#100% aperture area available year-round. (Established [[Scheffler Community Kitchen|Scheffler technology]] gives approximately 60% average aperture area.)
#Photograph shows two reflectors of 6.25 sqm each delivering 2000 to 2500 Watts per reflector. Trials on higher sizes of 10 sqm and 15 sqm square and rectangular dishes are to be conducted before standardization.
 
 
#Single axis fixed speed daily automatic [[tracking]] eliminates need of sensors and complicated hardware. Tracking system is easy to operate and maintain. Seasonal tracking is manual to be set once in 3-4 days.
#Expected cost of this system installation after commercialization is around Rs. 15000/- per kW installation with payback period of less than 30 months without subsidies. This is very comfortable for Industries.
 
 
#Photograph shows two reflectors of 6.25 m<sup>2</sup> each delivering 2000 to 2500 Watts per reflector. Trials on larger sizes of 10 m<sup>2</sup> and 15 m<sup>2</sup> square and rectangular dishes are to be conducted before standardization.
#Performance: For air working temp. of 250° C is comfortably achieved. Max. temp. attained for air is about 400° C. Thermic fluid can be comfortably used with second stage heat exchanger for steam generation.
 
 
#Expected cost of this system installation after commercialization is around Rs. 15000/- per kW installation with payback period of less than 30 months without subsidies. This is very comfortable for Industries.
 
#Performance: An air working temperature of {{Degree|250}} is comfortably achieved. Maximum temperature attained for air is about {{Degree|400}}. Thermic fluid can be comfortably used with second stage heat exchanger for steam generation.
   
 
Patent application pending. Intellectual property rights with Prof. Ajay Chandak.
 
Patent application pending. Intellectual property rights with Prof. Ajay Chandak.
Line 17: Line 19:
 
''[Text for this page was taken from http://www.princeindia.org/new_invention.htm.]''
 
''[Text for this page was taken from http://www.princeindia.org/new_invention.htm.]''
   
==See also==
+
==Documents==
 
*'''July 2006:''' [[Media:Granada06_Ajay_Chandak.pdf‎|Solar Energy for Quality Improvement in the Food-Processing Industry]] - ''Prof. [[Ajay Chandak]]''
 
*'''July 2006:''' [[Media:Granada06_Ajay_Chandak.pdf‎|Solar Energy for Quality Improvement in the Food-Processing Industry]] - ''Prof. [[Ajay Chandak]]''
   
  +
==See also==
[[Category:India]][[Category:Maharashtra]][[Category:Solar cooker designs]]
 
  +
* {{Cat|Solar food processing}}
  +
* [[Institutional solar cooking]]
  +
  +
==Contact==
  +
  +
{{See|PRINCE}}
  +
[[Category:India]]
  +
[[Category:Maharashtra]]
 
[[Category:Solar cooker designs]]
  +
[[Category:Parabolic solar cooker designs]]
  +
[[Category:Non-cooking uses]]
  +
[[Category:Solar food processing]]

Latest revision as of 17:33, 3 November 2015

Searchbox
Last edited: 3 November 2015      
Ajay Chandak industrial heater

This invention of Prof. Ajay Chandak has the potential to revolutionize the use of solar thermal application in India. Prince India invites proposals from industry and research organisation for commercialization of the new Parabolic Solar Concentrator.

The photograph shows only two concentrators to explain the concept while actually three to five concentrators will be used in field depending on site conditions.

Salient features of the new system are:

  1. Multiple reflectors with square shape in plan.
  2. Compact design as the shape is switched over to square from round.
  3. 100% aperture area available year-round. (Established Scheffler technology gives approximately 60% average aperture area.)
  4. Single axis fixed speed daily automatic tracking eliminates need of sensors and complicated hardware. Tracking system is easy to operate and maintain. Seasonal tracking is manual to be set once in 3-4 days.
  5. Photograph shows two reflectors of 6.25 m2 each delivering 2000 to 2500 Watts per reflector. Trials on larger sizes of 10 m2 and 15 m2 square and rectangular dishes are to be conducted before standardization.
  6. Expected cost of this system installation after commercialization is around Rs. 15000/- per kW installation with payback period of less than 30 months without subsidies. This is very comfortable for Industries.
  7. Performance: An air working temperature of 250 °C (482 °F) is comfortably achieved. Maximum temperature attained for air is about 400 °C (752 °F). Thermic fluid can be comfortably used with second stage heat exchanger for steam generation.

Patent application pending. Intellectual property rights with Prof. Ajay Chandak.

[Text for this page was taken from http://www.princeindia.org/new_invention.htm.]

Documents[]

See also[]

Contact[]

See PRINCE.