Changes: Kalan de Araw

Revision as of 17:30, 28 May 2014

Last edited: 29 March 2011

The reflector is compose of 6 pieces cut stainless steel mirror surface sheet welded (the thin blue horizontal line) or braze together to form a parabolic reflector (strips is a cone strip from analytic geometry) or a composite of Galvanize sheet and aluminum foil. the reflector can be rotate vertically and fix the loosening and tightening the lock nut. can rotate horizontal rotation at PIVOT. 2 arms and pot holder are welded together. the 4 legs are welded to the pivot pipe. Kalan de Araw is actually 3 pcs, the reflector to arm by lock nut, insert arm and pot holder to pivot with leg. you could put weight on the leg to prevent from moving and tie the reflector during wind storm. The reflector could be easily rotate at a 3 axis because the center of gravity is approximately at the focus of the reflector and where the photon is concentrated.

Put your black pot with your favorite dish on the pot holder and focus the photon rays you collect from the Sun. after 45 minutes it is done. be sure there is plenty of sun rays (photon).

Hope you gain even a little in me these can only means a lot, really really lots. you know right.

Thank you.

FOR MORE INFORMATION CLICK THE LINK BELOW

http://freddelafuente.blogspot.com/

Contact

freddelafuente@yahoo.com

@@ Line 1: / Line 1: @@
+{{GoogleTranslateLinks}}
-[[Image:KALANDE ARAW.JPG|700px]]
+{{Updated|3|29|11}}
-==Contact==
+[[Image:KALANDE ARAW.JPG|right|350px]]
-The reflector is compose of 4 pieces cut stainless steel mirror surface sheet welded (the thin blue horizontal line) or braze together to form a parabolic reflector (strips is a cone strip from analytic geometry) . the reflector can be rotate vertically and fix the loosening and tightening the lock nut. can rotate horizontal rotation at PIVOT. 2 arms and pot holder are welded together. the 4 legs are welded to the pivot pipe. Kalan de Araw is actually 3 pcs, the reflector to arm by lock nut, insert arm and pot holder to pivot with leg. you could put weight on the leg to prevent from moving and tie the reflector during wind storm. The reflector could be easily rotate at a 3 axis because the center of gravity is approximately at the focus of the reflector and where the photon is concentrated.
+[[File:KALAN_DE_ARAWF.jpg|right|350px]]
+The reflector is compose of 6 pieces cut stainless steel mirror surface sheet welded (the thin blue horizontal line) or braze together to form a parabolic reflector (strips is a cone strip from analytic geometry) or a composite of Galvanize sheet and aluminum foil. the reflector can be rotate vertically and fix the loosening and tightening the lock nut. can rotate horizontal rotation at PIVOT. 2 arms and pot holder are welded together. the 4 legs are welded to the pivot pipe. Kalan de Araw is actually 3 pcs, the reflector to arm by lock nut, insert arm and pot holder to pivot with leg. you could put weight on the leg to prevent from moving and tie the reflector during wind storm. The reflector could be easily rotate at a 3 axis because the center of gravity is approximately at the focus of the reflector and where the photon is concentrated.
 Put your black pot with your favorite dish on the pot holder and focus the photon rays you collect from the Sun. after 45 minutes it is done. be sure there is plenty of sun rays (photon).
@@ Line 9: / Line 11: @@
 Thank you.
+FOR MORE INFORMATION CLICK THE LINK BELOW
+http://freddelafuente.blogspot.com/
+==Contact==
 [mailto:freddelafuente@yahoo.com freddelafuente@yahoo.com]