Tom Sponheim (talk | contribs) m (→Steps for use) |
Tom Sponheim (talk | contribs) mNo edit summary |
||
Line 1: | Line 1: | ||
⚫ | The '''Boil 3, Add 1 Method''' is a proposed way to [[pasteurize]] a given amount of water using less fuel, without the need for a thermometer. To be safe to drink water doesn't have to be boiled (see [[Water pasteurization]]); it only has to be heated to 65°C (150°F). If one has a thermometer, then it is very easy to heat water to this lower temperature and know that it is safe to drink. The Boil 3, Add 1 Method provides a way add hot and cold water together to be able to pasteurize water when no thermometer is available. |
||
− | '''''Note that the method described below is only accurate at sea level.''''' |
||
⚫ | Using this method, one brings 3 measures of water to a boil and then adds 1 measure of cold water. Tests show that adding 1 measures of water at 1°C (the coldest temperature where water is still liquid) to 3 measures of boiling water (100°C) will result in 4 measures of water at 78°C (which leaves a margin of error of 13°C since a safe pasteurization temperature is 65°C). |
||
⚫ | The '''Boil |
||
− | |||
⚫ | Using this method, one brings |
||
==Steps for use== |
==Steps for use== |
||
#Select a small container much smaller than your cooking pot. |
#Select a small container much smaller than your cooking pot. |
||
− | # |
+ | #Pour 3 containers full of water into the cooking pot. |
− | #Heat water to boiling. |
+ | #Heat the water to boiling. |
− | #Add |
+ | #Add 1 container full of cold water to the boiling water. |
#The water is now safe to drink. |
#The water is now safe to drink. |
||
==Things that you should note== |
==Things that you should note== |
||
⚫ | |||
*Add the cold water as soon as the water in the pot boils so that the hotter water isn't reduced in volume by evaporation. |
*Add the cold water as soon as the water in the pot boils so that the hotter water isn't reduced in volume by evaporation. |
||
⚫ | |||
==Topics for study== |
==Topics for study== |
||
− | The above method was designed to work even if the colder water is close to freezing. This is necessary since we must design for the worst-case scenario. |
+ | The above method was designed to work even if the colder water is close to freezing. This is necessary since we must design for the worst-case scenario. Humans may be able to determine when water is lukewarm (body temperature). This lukewarm water could be added in a proportion of 1:1 with boiling water and pasteurization would still be achieved. |
Revision as of 00:13, 22 June 2011
The Boil 3, Add 1 Method is a proposed way to pasteurize a given amount of water using less fuel, without the need for a thermometer. To be safe to drink water doesn't have to be boiled (see Water pasteurization); it only has to be heated to 65°C (150°F). If one has a thermometer, then it is very easy to heat water to this lower temperature and know that it is safe to drink. The Boil 3, Add 1 Method provides a way add hot and cold water together to be able to pasteurize water when no thermometer is available.
Using this method, one brings 3 measures of water to a boil and then adds 1 measure of cold water. Tests show that adding 1 measures of water at 1°C (the coldest temperature where water is still liquid) to 3 measures of boiling water (100°C) will result in 4 measures of water at 78°C (which leaves a margin of error of 13°C since a safe pasteurization temperature is 65°C).
Steps for use
- Select a small container much smaller than your cooking pot.
- Pour 3 containers full of water into the cooking pot.
- Heat the water to boiling.
- Add 1 container full of cold water to the boiling water.
- The water is now safe to drink.
Things that you should note
- Add the cold water as soon as the water in the pot boils so that the hotter water isn't reduced in volume by evaporation.
- Water boils at a lower temperature at higher altitudes. At sea level one can mix the water 5:2 instead of 3:1, which gives you more water for a given amount of fuel.
Topics for study
The above method was designed to work even if the colder water is close to freezing. This is necessary since we must design for the worst-case scenario. Humans may be able to determine when water is lukewarm (body temperature). This lukewarm water could be added in a proportion of 1:1 with boiling water and pasteurization would still be achieved.